Alex Green Alex Green's Profile Page

Alex Green Alex Green

0 Course Enrolled • 0 Course Completed

Biography

Valid JN0-664 Practice Materials & Interactive JN0-664 Course

Service Provider, Professional (JNCIP-SP) JN0-664 exam dumps is a surefire way to get success. Actual4Labs has assisted a lot of professionals in passing their JN0-664 test. In case you don't pass the Service Provider, Professional (JNCIP-SP) JN0-664 exam after using JN0-664 pdf questions and practice tests, you have the full right to claim your full refund. You can download and test any JN0-664 Exam Questions format before purchase. So don't get worried, start JN0-664 exam preparation and get successful.

Achieving the Juniper JN0-664 certification demonstrates a high level of expertise in service provider network design, implementation, and management. Service Provider, Professional (JNCIP-SP) certification is recognized globally as a mark of excellence in the networking industry and can open up new career opportunities for professionals looking to advance their careers in service provider networks. With the growing demand for network professionals who can design, implement, and manage service provider networks, the Juniper JN0-664 certification is a valuable asset for any networking professional looking to enhance their skills and knowledge.

Juniper JN0-664 certification exam covers a wide range of topics related to service provider networks, including advanced routing protocols, MPLS VPNs, multicast, QoS, and troubleshooting. JN0-664 Exam consists of multiple-choice questions, simulation-based questions, and scenario-based questions. Candidates must have a strong understanding of Juniper Networks products and solutions, as well as a solid understanding of service provider network architecture and operations.

Juniper JN0-664: Service Provider, Professional (JNCIP-SP) exam is a certification exam that is designed for professionals who are looking to enhance their skills in the field of service provider networking. Service Provider, Professional (JNCIP-SP) certification exam is conducted by Juniper Networks, which is one of the leading networking equipment providers in the world.

>> Valid JN0-664 Practice Materials <<

Interactive JN0-664 Course - JN0-664 Online Bootcamps

One Juniper certification will help you get highly favor of large enterprises, it will bring you better opportunities. JN0-664 valid exam dumps PDF will be a stepping-stone for you to success. The most important method for passing exams is targeted learning and preparing. Programmatic learning may make you know professional knowledge better. But it will not only cost a lot of your time and energy but also can't guarantee you pass. Our JN0-664 Valid Exam Dumps PDF can help you pass exam for sure.

Juniper Service Provider, Professional (JNCIP-SP) Sample Questions (Q59-Q64):

NEW QUESTION # 59
Which two statements are correct about VPLS tunnels? (Choose two.)

A. LDP-signaled VPLS tunnels only support control bit 0.
B. BGP-signaled VPLS tunnels require manual provisioning of sites.
C. LDP-signaled VPLS tunnels use auto-discovery to provision sites
D. BGP-signaled VPLS tunnels can use either RSVP or LDP between the PE routers.

Answer: A,D

Explanation:
https://www.juniper.net/documentation/us/en/software/nce/feature-guide-virtual-private-lan-service/topics/task
/vpls-ldp-signaling-solutions.html
https://www.juniper.net/documentation/us/en/software/junos/vpn-l2/topics/concept/vpns-configuring-vpls- routing-instances.html#id-11510150__id-11568648

NEW QUESTION # 60
Exhibit

R4 is directly connected to both RPs (R2 and R3) R4 is currently sending all ,o,ns upstream to R3 but you want all joins to go to R2 instead Referring to the exhibit, which configuration change will solve this issue?

A. Change the local address on R2 to be higher than R3.
B. Change the group-range to be more specific on R2 than R3.
C. Change the default route in inet.2 on R4 from R3 as the next hop to R2
D. Change the bootstrap priority on R2 to be higher than R3

Answer: B

NEW QUESTION # 61
You are attempting to summarize routes from the 203.0.113.128/25 IP block on R8 to AS 64500.
You implement the export policy shown in the exhibit and all routes from the routing table stop being advertised.
In this scenario, which two steps would you take to summarize the route in BGP? (Choose two.)

A. Remove the from protocol bgp command from the export policy.
B. Add the set protocols bgp family inet unicast add-path command to allow additional routes to the RIB tables.
C. Add the set routing-options aggregate route 203.0.113.128/25 command.
D. Replace exact in the export policy with orlonger.

Answer: C,D

NEW QUESTION # 62
Exhibit

Referring to the exhibit, you must provide Internet access for VPN-A using CE-1 as the hub CE.
Which two statements are correct in this situation? (Choose two.)

A. RIB groups are not needed to leak routes between the inet. 0 and VPN-A. inet. 0 tables,
B. You must use RIB groups to leak routes between the inet. o and vpn-a. inet. o tables.
C. Internet traffic from Site 2 takes the path of PE-2 -> PE-1 -> CE-1 -> PE-1 -> GW-1.
D. Internet traffic from Site 2 takes the path of PE-2 -> PE-1 -> GW-1.

Answer: B,C

Explanation:
Explanation
To provide Internet access for VPN-A using CE-1 as the hub CE, you need to do the following:
* You must use RIB groups to leak routes between the inet.0 and vpn-a.inet.0 tables on PE-1 and CE-1.
RIB groups are routing options that allow you to import routes from one routing table into another routing table based on certain criteria. In this scenario, you need to configure RIB groups on PE-1 and CE-1 to import Internet routes from inet.0 into vpn-a.inet.0 and vice versa.
* Internet traffic from Site 2 takes the path of PE-2 -> PE-1 -> CE-1 -> PE-1 -> GW-1. This is because Site 2 does not have direct Internet access and needs to use CE-1 as its default gateway for Internet traffic. Site 2 sends its Internet traffic to PE-2, which forwards it to PE-1 based on VPN-A routes. PE-1 then sends it to CE-1 based on RIB group import policy. CE-1 then sends it back to PE-1 based on its default route pointing to GW-1. PE-1 then forwards it to GW-1 based on RIB group import policy again.

NEW QUESTION # 63
You are asked to protect your company's customers from amplification attacks.
In this scenario, what is Juniper's recommended protection method?

A. ASN prepending
B. destination-based Remote Triggered Black Hole
C. unicast Reverse Path Forwarding
D. BGP FlowSpec

Answer: D

NEW QUESTION # 64
......

The Juniper JN0-664 PDF is the collection of real, valid, and updated Juniper JN0-664 practice questions. The JN0-664 PDF dumps file works with all smart devices. You can use the Service Provider, Professional (JNCIP-SP) PDF questions on your tablet, smartphone, or laptop and start JN0-664 Exam Preparation anytime and anywhere. The JN0-664 dumps PDF provides you with everything that you must need in Juniper JN0-664 exam preparation and enable you to crack the final Juniper JN0-664 exam quickly.

Interactive JN0-664 Course: https://www.actual4labs.com/Juniper/JN0-664-actual-exam-dumps.html

Alex Green Alex Green

Biography

Useful Menu

Contact Now